Contact Us

Hangzhou Xianghuai Machinery Technology Co.,Ltd

Address: Room 809, No 5 Building, No 998 Wenyi West Road, Yuhang District, Hangzhou City, China

Tel:+86-571-88610079

M/P:+8617767132623

E-mail: z.y@xhmachine.com

The Principle And Structure Of The Slitting Machine

- May 23, 2018 -

Slitting machine is a kind of mechanical equipment that divides wide-format paper, mica tape or film into multiple narrow-width materials. Slitter is commonly used in papermaking machinery, wire and cable mica tapes, and printing and packaging machinery. The main application of slitting machine: mica tape, paper, insulating material and film slitting, especially suitable for slitting of narrow tape (insulation material, mica tape, film, etc.).

principle

1. The paper slitting machine will use a fixed-length slitting control to cut the entire roll or entire length of raw materials into fixed lengths, such as plastic packaging materials, packaging cartons, steel plates, films, leather, wood chips, etc.

2. The cutting length can be set continuously. If there is an error in the actual cutting length, it can be easily calibrated by setting the parameters.

3. Paper slitting machine slitting control is divided into two kinds: static and dynamic slitting: when the set length arrives, it will stop accurately, and then it will be processed by static slitting, and will be restarted after slitting; when the set length arrives, it will not be stopped. Cutting signal, slitting machine dynamic cutting process in the process of material movement.

Structural advantages

The middle of the paper tube slitting machine is equipped with a main shaft of a processing paper tube. The front end of the main shaft is fixed on the base by a set of bearings. A belt pulley is mounted in the middle of a group of bearings; a compression cylinder is installed near the base, and the cylinder is supported. A set of support rod bearings are mounted on the upper end of the rod to support the spindle.

A main cutter shaft is mounted on the upper end of the paper tube slitting machine, and a plurality of blades are arranged on the main cutter shaft, and are arranged according to a certain gap; a supporting frame of a main cutter shaft is also arranged on the top of the paper tube slitting machine; A supporting cylinder is installed in the middle.

The structural advantage of the paper tube slitting machine fills the gap in automatic pipe cutting machine technology.


Related News

Related Products

  • CI Type High Speed Flexo Printing Machine
  • Plastic Bag Flexo Printing Machine
  • UV Printing Machine